The Hard Facts About Commercial Water Damage

 

For any business owner, his building is without a doubt his biggest asset. Sure, there are employees and products to consider, but without a place of business for everyone to congregate, you wouldn’t even have a business. More often than not, the building is also one of the biggest expenses. As hard as it is to foresee and prevent future repair problems, no business owner these days wants to bear the expenses of unexpected breakdowns and repairs.

 

This is especially true when it comes to water damage. Water is a formidable enemy and creates a whole host of potential future problems like mold and mildew. Sometimes frozen and leaky pipes are just unavoidable. Every building that has running water will at some point be at risk of water damage. It’s a hard truth to face, but it is one you must wrap your head around to learn to move past it in the most efficient ways possible.

 

Preventive Maintenance Can Help

 

There is simply no way to prepare for every unforeseeable incident. Things are going to happen unexpectedly and these will oftentimes be the most costly and troubling problems. That said, it doesn’t mean you should just let your plumbing system go to ruins. Just sitting by and waiting for problems to happen means you are only asking for problems. Get in the habit of maintaining, cleaning, and inspecting your system. The more familiar you are with it, the better equipped you will be to handle and prevent problems.

 

Roof Leaks Can Contribute

 

That statement mentioned before was only half right. The hard truth of the matter is that every building is at potential risk of water damage. There is always a real possibility of roof leaks. Roof leaks oftentimes stay hidden and don’t show up until major complications have caused them to rear their ugly heads. With drywall, plywood, shingles, and insulation to go through, it is hard for tiny water leaks to show. Therefore, you’ll also need to familiarize and inspect your roofing setup.

 

Minor Leaks Are Not To Be Left

 

A minor leak at the water heater or a drip under the sink in the drainage section might seem like things that can be postponed or put off. Absolutely not! If your insurance company catches wind that you were aware of a problem and failed to correct it, they’ll deny coverage immediately. They might even ban you from future policies. Also, that’s just laziness and bad ownership.

 

Varying Water Contamination

 

Water really is a fickle mistress that most people don’t understand. Would you be shocked to learn there are three different water contamination ratings? These are white water, gray water, and black water. The cleanup and sanitization of the ensuing messes will depend on the type of damage you have incurred. For instance, clean-up and sanitization of black water are much different and more threatening than white water contamination.

 

Know Your Insurance Policy

 

Unexpected repairs are already troubling enough. They’ll only be more troubling if you learn that your insurance isn’t going to cover the damages. Insurance policies can be tricky, so you’ll want to make sure you are 100% clear with your agent as to what will be covered and will not be covered. This is something you are better off uncovering when you initiate the policy. What’s the point in paying each month for flood protection when the likelihood of your store flooding is so low that it’s virtually impossible? Safe yourself some money and then take that money and divert it elsewhere to more meaningful policies.

 

Flood Insurance Is Separate

 

Speaking of flood insurance, many aren’t even aware of the fact that this isn’t something that’s covered under your regular building policy. Flood insurance is considered an entirely different entity altogether, and if your building is at risk of such potential natural disasters, you’ll want to make sure you are covered. Some providers might not even be willing to offer policies to owners that reside in known flood areas, so this is always something to consider. At the very least, your monthly premiums might end up being so high that they aren’t even worth it.

 

Quick Action Is A Must!

 

This one probably goes without saying, but there is usually so much scrambling in the aftermath of a major disaster that people lose themselves, their thoughts, and their objectives. After any major water damage and after getting the injured to safety, your next course of action should be to notify your insurance provider. Establishing and maintaining an open and frequent line of communication with your insurance provider will only go to benefit your business.

 

Bringing In The Pros Might Be Necessary

 

Not reacting promptly to water damage is only going to make the situation all that much worse. When you do finally go to start correcting things, you’ll be facing even more damage, potential mold growth, and other ruined inventory that maybe could have been saved. Water damage is extremely tricky and the best way to tackle it is with the assistance of trained pros. Such restoration professionals know exactly how to act and reduce the likelihood of more future problems. There could be hidden water damage behind the walls or underneath the flooring that you aren’t even aware of. Professionals know where and how to look.

 

Varying Cleaning Protocols

 

In major water damage cases, not everything will be salvageable. And what is salvageable might require different methods of saving. There are different guidelines for saving different materials. Insulation might be able to be dried out and saved, whereas cellulose-containing items might need to be discarded all together.

 

Your Problem Don’t End With Water Removal

 

Just because the water has been cleared from your building it doesn’t necessarily mean you are in the clear. It only takes a day or two before mold can set in. If there are areas where the moisture and humidity are still excessive, you could be facing future problems. Never just assume that because the water is gone your troubles and worries are over.

 

Call The Experts!

 

Any business owner should expect future problems. Owning a building is like owning a car, it’s a matter of when and where not if. You will experience problems at some point, so it is best to already have a restoration company in mind. Planning will only afford you the time you need to conduct the proper research. Vet your potential choices to the fullest of your abilities to ensure you pick the most worthy. Want to speak with our previous clients? Just have a few simple questions. Want to get us out on the property to establish a rapport? All this is possible with our free quotes and in-home consultations. Just give our local branch a call today.

from A1 Water & Mold Removal https://topmoldandwaterguysofsanantonio.com/the-hard-facts-about-commercial-water-damage/

Basement Mold Prevention And Removal Tips

Mold is the first sign of a moisture or water problem. A basement is already exposed to humidity because it is partially or fully surrounded by soil. The moisture from the soil seeps through tiny crevices in the concrete blocks and mortar joints.

Keeping moister out of basements is a continuous and sometimes inevitable process. Homeowners realize early on what to expect from their basements. Only a few will invest money to waterproof and encapsulate their basements. These are expensive and tedious processes that stop moisture in its tracks.

Damp basements are subject to mold and mildew, two types of fungi also commonly found in human attics, bathrooms, laundry rooms, and crawlspaces. Mold will grow anywhere indoors and outdoors. Since the fungus is very hardy, it will take extreme work to stop it from growing.

What Causes Mold To Grow In Basements?

Scientists have identified more than 100,000 types of mold. The most dangerous type is black mold, which poses severe health risks to humans and animals. Contrary to belief, mold, itself, is not dangerous. Its toxins are dangerous. Mold generates mycotoxins that enter the respiratory tract when inhaled through the nose and mouth. Mycotoxins cause an immune response – runny nose, cough, shortness of breath, wheezing, and watery eyes.

As mentioned above, mold grows anywhere that is damp, dark, warm, wet, and/or cold. Most people do not know that mold is a living, breathing thing. Since it needs food to survive, it will eat just about anything, including human food and organic food made of cellulose. Mold grows on organic materials like drywall, carpet, drapes, paper, cardboard boxes, and wood.

The most common causes of mold include:

• Leaky plumbing pipes
• Excessive humidity
• Poorly sealed doors and windows
• Damaged concrete blocks
• Cracked and missing mortar
• Poor ventilation
• Standing water
• Flood damage
• Poor drainage
• Heavy rainfall
• Damaged gutters
• Leaky HVAC flex duct

How To Prevent Mold From Growing In Basements?

It cannot be stressed enough, how dangerous mold can be to humans and animals. In addition to these dangers, mold erodes organic structural materials. When you combine all these risks together, mold is extremely dangerous to humans and their pets and homes.

The only way to prevent mold from growing in your basement is to keep it dry. Routinely inspect the water pipes, sewage pipes, HVAC flex duct, vents, mortar, doors, and windows. Any damage detected during the inspection should be immediately repaired. Ignoring the damage will only encourage mold to start growing inside your basement.

How To Safely Remove Mold From Basement Walls, Ceilings, And Floors?

The first sign of mold is a major warning sign of things to come. It is crucial to tackling the problem sooner than later. The longer the mold grows, the more severe the erosion of the precious materials that structure your home.

Minor and moderate mold problems can be tackled without bringing a professional mold remediation team onboard. Never approach a mold removal project without the proper equipment. Safety gear – goggles, face masks, rubber gloves, and a PPE suit – is a necessity.

Utilize a stiff brush and mold cleaner to remove mold from drywall, tile, hardwood, paneling, and linoleum. Once the mold is removed, the damage must be repaired and the moisture problem eliminated.

Mold Removal Safety Tips

• Wear safety PPE gear for mold removal
• Work in a well-ventilated area
• Safely dispose of mold-infested drapes, bed linen, clothing, stuffed animals, and other materials
• Utilize a mixture of bleach and water to clean the mold off walls, flooring, and ceilings
• Tear up the mold-infested carpet and replace it with tile or linoleum
• Clean upholstered furniture if possible or dispose of at your local landfill
• Replace moldy insulation, drywall, and other damaged materials

Once the damaged materials are removed from the basement, it is time to start tackling the humidity and water problems. Install additional vents to improve ventilation throughout the area. If necessary, install a dehumidifier to remove drive-down humidity levels.

If you utilize your basement for storage, it is crucial to take the proper measures to protect the items from exposure to moisture. Store paper documents, stuffed toys, artwork, books, and other paper materials in sealed containers. Seal upholstered furniture in plastic.

Our residential mold removal team is on standby to help restore your basement to its original form.

from A1 Water & Mold Removal https://topmoldandwaterguysofsanantonio.com/basement-mold-prevention-and-removal-tips/

Improve The Air Circulation At Home To Reduce Mold Overgrowth

At home, you’ll want to do everything you can to prevent mold from growing. If you don’t, you and your loved ones are going to be exposed to this dangerous material. You don’t want this to happen since it could lead to serious health complications. Instead, you should begin taking steps to reduce the risk. Thankfully, homeowners can take numerous steps to reduce the likelihood that mold is going to grow. For instance, you should make sure that the air in your home can properly circulate. If the air cannot freely circulate, you’re likely going to deal with moisture problems. Improving airflow circulations can help you avoid problems.

Below, you’ll find tips for improving your home’s circulation so you can avoid mold overgrowth.

Open Your Windows

From time to time, you should consider opening your windows. Doing so is going to make a big difference. When you open your windows, the air is going to flow through. Air will be able to enter and exit the home easily. It helps if there is a slight breeze outside since it will push air through the home. You can also try opening windows and doors on opposite sides of the building. It will help by establishing cross-ventilation. Fresh air will be able to flow through the residence. As a result, any excess moisture and humidity will be removed.

Even if it is chilly outside, you can open your windows slightly. Every little bit helps.

Using Fans

Don’t forget to use your fans. Ultimately, you’ll want to make sure that air is flowing through the home. Increasing airflow will make a big difference. One of the best ways to increase airflow is by turning on the fans in your home. Using fans will help circulate the air in your home. More importantly, you need to make sure that you’re using your bathroom fans. When you shower, you’re going to create a lot of moisture and humidity in your bathroom. The humidity has to go somewhere. It can cling to your walls, ceiling, and light fixtures. If you don’t stop this, there is a good chance that it’ll create bigger problems soon.

Instead, you should use your ventilation fans to ensure that the humidity is pulled out of the room. Then, it can escape through the vent. Bathroom fans are vital for preventing the development of mold in a home. Make sure that the vent exits through the roof. Otherwise, it will enter the attic and create problems there. You can also use your HVAC fan to circulate more air through the home.

Using A Dehumidifier

Ultimately, it can be difficult to remove excess humidity and moisture from a residence. To combat this problem, you should consider purchasing and using a dehumidifier. The appliance is specifically designed for this purpose. When the dehumidifier is running, it will remove humidity from the atmosphere. The moisture will be transported to the dehumidifier’s tank. You’ll have to empty the tank regularly to prevent the system from automatically turning off. Regardless, using a dehumidifier is a great way to reduce the humidity level in your home.

Get Professional Assistance

At the end of the day, there is only so much you can do on your own. With that being said, you should consider getting in touch with a qualified professional. When you do, you can guarantee that the professional will handle the problem swiftly and effectively. With their assistance, you can find the most effective ways to reduce the humidity and moisture in your residence. If you need assistance, call our office right now. We’ll do everything we can to help you resolve this problem.

from A1 Water & Mold Removal https://topmoldandwaterguysofsanantonio.com/improve-the-air-circulation-at-home-to-reduce-mold-overgrowth/

Preventing Mold After Water Damage

You never know when you’re going to experience a house fire or flood. Once this happens, you’ll have to worry about mold developing in your water. Unfortunately, water damage will eventually lead to the development of mold if you don’t do something about it. A flood will send water rushing into your home causing the moisture levels to increase. As for a house fire, it will have to be put out using water. Both can lead to water damage and mold development. Therefore, you must take steps to prevent this from happening. You don’t want to let mold grow in your home.

Our team can help you avoid the development of mold after a flood or fire. Alternatively, you can use the advice below to protect your home from problems.

Preventing Mold Development After You’ve Experienced Water Damage

Mold can develop quickly in any building. The EPA suggests that it can begin developing in as few as 24 hours after water damage has occurred. You cannot sit around and wait for the water to leave. Instead, you must begin getting rid of the water immediately. Use a vacuum or towels to soak up the water and transport the water elsewhere. You’ll also want to call your insurance company so they can inspect the situation. Once you’ve done that, call our office. We offer water damage remediation services to help you tackle these problems swiftly.

Steps To Follow To Prevent Mold

After a flood or fire, you must take steps to prevent mold from growing in your home. Use the advice below to achieve this goal.

Extracting The Water

First, you need to begin removing the water from your residence. Ultimately, this is one of the most vital steps in the process. Allowing excess water to stay in your home will greatly increase the likelihood that mold is going to start developing in your home. You can probably use a vacuum to remove water from small rooms. However, larger areas will require high-tech tools. If you need assistance, you can depend on our services. We’re always eager to help our clients deal with such problems. We’ll get rid of the water and make sure your home is dry.

Dehumidifying And Ventilating

Once you’ve managed to remove the standing water, you must dry the room thoroughly. Remember that mold spores are going to thrive in rooms with excess moisture. It is wise to use a dehumidifier to remove excess moisture from the building. Remember that you’ll have to empty the tank regularly. Otherwise, the system will turn off automatically. You’ll also want to increase the ventilation by opening your doors and windows. Let the area air out to prevent mold from growing.

Clean & Dry

You’ll also need to clean and dry the area. Remove any wet items from the area. Depending on the severity of the problem, you may need to remove furniture, electronics, clothes, and more. Make sure these items are placed outside so you can clean the home. Your carpets are likely soaked at this point. You’ll have to remove them so you can replace them. Otherwise, the water will damage the wood underneath the carpets. Don’t forget to remove the drywall and panels. Once you’ve done that, you can clean the area and let it dry.

Tips For Staying Safe

When cleaning the water damage from your home, make sure that you remain safe. If you expose yourself to dangerous toxins, you’re likely going to get sick. Don’t let this happens. Wear proper protective equipment to ensure that you’re going to be safe throughout the cleanup process.  Although you might be able to resolve this issue on your own, it is easier to get professional assistance. Our technicians are ready to help you.

We can begin working hard for you within hours. Our technicians are standing by so they can be dispatched to your home right away. We can help you clean up every item that has been impacted. We use the safest disposal technicians to ensure that everything is going to be okay. We don’t turn your problem into a mess for someone else.

It is not easy to prevent mold from developing after you’ve experienced water damage. Therefore, you must act quickly. The best thing to do is to get in touch with a reputable water damage restoration company in your area. Call our office to get started. We’ll deal with the mess for you so you can sleep soundly. Our services are available around the clock so don’t hesitate to call us.

from A1 Water & Mold Removal https://topmoldandwaterguysofsanantonio.com/preventing-mold-after-water-damage/

How To Handle Sewage Backup In Your Basement

Owning a home with a basement can afford many great benefits and uses. Such areas not only can be used for massive storage but can be converted and transformed into livable spaces. Need to supplement your income? There is no better way than taking on a tenant. Maybe you want a place where you can go just to get away from everything. The possibilities are endless! Unfortunately, owning a basement does not come without risks. And one of those many risks will be the potential of backed-up sewage lines and water leaks.

As you likely already know, sewage lines are responsible for carrying away your unwanted waste. The line from your bathroom will eventually lead outside to a sewer main or septic tank. When clogs occur, it’s going to cause raw sewage to back up in these lines and eventually stop flowing altogether. Create enough pressure or sewage buildup and these lines will give, delivering raw sewage to your home.

Is Sewage Dangerous?

It goes without saying that sewage is smelly and unsightly, but just how dangerous is it? Sewage truly is a unique byproduct of human waste. It’s not just comprised of waste and waste products, but it also contains water, organic, and inorganic matter. There are mineral salts as well as garbage. The organic matter might seem less worrisome for some because it is known to naturally decompose quickly.

However, during this decomposition process, it creates and emits an odorous gas that is hazardous to your health. It only grows even more lethal when it is mixed with human waste. You throw in the potential disease-causing pathogens, and the need for quick removal of this substance only grows direr.

Backed-up sewage is without a doubt extremely dangerous and rated as a category 3 water or black water. It should be handled immediately most safely and effectively possible. How does one go about doing just that?

Help! Sewage Is Backed Up In My Basement

Finding standing sewage in your basement is troubling, to say the least. However, that doesn’t mean you should lose your head. Maintaining composure and taking the swiftest, most effective course of action will only ensure desired results. Here’s what you’ll need to consider immediately:

• If sewage has built up in the basement it has also likely built up in the toilets and the sinks as well as the pipes leading to those appliances. The real trick of the matter is discovering where the clog is and going about unclogging it. It might be possible that the clog is near the toilet or sink. Not likely, but possible, so you’ll want to begin there.
• Even if the sinks or toilets are not the culprits, you do not want to use them when you are experiencing blockages. Future use of these appliances will only cause further buildup. If the main line is blocked, you’ll only be introducing more waste in the basement.
• Installed somewhere in your mainline there should be what’s referred to as a clean-out. It’s a T or Y joint with a threaded cap. This can be removed and offers access to the mainline for cleaning. If you are handy enough, you can remove this cap and attempt flushing the system yourself. If not, you’ll want to make sure the plumber has clear access to it.
• If your basement is standing with water, you’ll want to immediately try to shut down the power flowing into the room. Stepping into this standing water with electricity flowing only creates potential electrocution hazards.

Always Assess The Risks

Dealing with standing water and sewage anywhere is dangerous. It’s an unsightly mess and one can easily lose themselves in it and make mistakes that only lead to more problems. Therefore, it is essential to compose yourself and start effective strategic planning. Getting sewage in your open cuts or sores could be dangerous to your health. Getting the substance in your nose, eyes, ears, or mouth only creates even more potential health hazards.

In such situations, you are much better off handing the job off to a professional. Just navigating through the mess to start the cleaning will require specialized gear, tools, and knowledge that most homeowners don’t even have on hand. Our specially trained teams are more than capable and ready to handle such jobs. We always have emergency teams standing by when and where they are needed. All it takes is a simple call to our local branch to get us on the scene.

from A1 Water & Mold Removal https://topmoldandwaterguysofsanantonio.com/how-to-handle-sewage-backup-in-your-basement/

Laundry Room Mold Test

Laundry rooms are notorious for high humidity, which is one of the top culprits of mold growth. A washer utilizes cold, warm, and hot water to clean clothes, drapes, bed linen, and other fabrics. Warm and hot water generates steam that can lead to excess humidity in laundry rooms. This is not to mention the humidity generated by the dryer. The excess humidity will cause mold to grow on the ceiling, walls, and along the baseboards. Homeowners should never ignore mold because it poses health risks for humans and pets. The key to preventing mold growth is humidity control. Plumbing leaks are less commonly the problem while out-of-control humidity encourages mold to grow. Mold should be tested to ensure it is actually mold. Mold and mildew share the same features. There are more than 100,000 types of mold. Mold appears in various colorations, including green, blue, black, yellow, and red. Mildew, on the other hand, is white.

Dangers Of Laundry Room Mold

The Environmental Protection Agency “EPA” warns against the health risks of mold indoors. Minor mold problems cause an immune response of varying symptoms, including sneezing, runny nose, coughing, wheezing, and shortness of breath. Long-time exposure to mold mycotoxins can cause permanent respiratory problems, such as emphysema, asthma, and Chronic Obstructive Pulmonary Disease “COPD.” Black mold is the most dangerous type. It will grow indoors and outdoors in favorable conditions. Mold is a living thing that feeds on human food and organic food made of cellulose.

Conduct Routine Mold Inspections

It is crucial for the integrity of your laundry room and every room in your home to conduct a routine mold inspection. Carefully assess high-risk areas like the bathroom, shower, kitchen, and laundry room. Plumbing pipes should also be included in the inspection. Leaky water and sewage pipes also cause mold and mildew. Repair leaks as soon as possible to deter mold growth. Leaky HVAC duct increases humidity levels in laundry rooms. Reseal flex duct joints and repair leaks to deter mold from growing in laundry rooms in basements. The hot and cold water lines and drainage hose running to and from the washer must be maintained at the highest level. Any leaks should be repaired properly and immediately.

Mold Tests

Mold tests are available at many big-box, hardware, and home & garden stores. The process requires a small sample of the substance growing inside your laundry room. This is the only true way to determine if the green, black, or blue substance is mold.

Laundry Room Mold Remediation

Ignoring mold will result in significant damage to the important structures of your home. Mold needs cellulose to survive in laundry rooms. Carpet, wood, paper, and other structural materials contain cellulose. Mold erosion will eventually lead to severe damage to the entire structure of your home. Our residential mold remediation service is affordable, efficient, and accessible. We offer full accessibility to the top mold remediation to all homeowners, tenants, property managers, and commercial laundry mats. Learn more by contacting our local office to speak with a mold remediation expert.

from A1 Water & Mold Removal https://topmoldandwaterguysofsanantonio.com/laundry-room-mold-test/

4 Steps For Limiting Mold Development In Your Business Building After A Flood

Floods can happen almost anywhere. If you’re lucky, your business is located on a hill so you won’t have to worry about floods. However, many businesses are located on Main Street where floods are common. After floodwaters have entered your building, there is going to be an increased risk of damage and mold development. You cannot delay getting assistance immediately. Otherwise, the mold will begin spreading and posing a bigger risk to you and your loved ones. If you need assistance, you should not hesitate to contact A1 Water & Mold Removal San Antonio. We’re the best mold remediation business in your area. Read the guide below to learn more about the risks linked to mold.

Items That Can be Impacted By Mold

Unfortunately, mold can cause serious problems for you and your business. It is pertinent to do something about it because the problem will quickly worsen. Unfortunately, numerous items can be severely destroyed and damaged by mold. Therefore, you should take steps to protect your belongings before something happens. Below, you’ll find a breakdown of the items that can be damaged by mold.

• First, you have to worry about wood and upholstered furniture. Mold can get trapped in the materials. If this happens, you should make sure that mold is not growing on your furniture. Do something to fix the problem quickly.
• Mold can also impact metal, glass, and plastic. You can likely fix the problem by cleaning these materials. The mold can be removed easily.
• Finally, you should protect your carpets and rugs. Mold can get stuck in the fibers. Once this happens, it’ll be difficult to salvage the material. Instead, you’ll probably have to throw the rugs away and replace them.

Tips For Preventing The Development Of Mold After A Flood

It is going to be difficult to get rid of mold spores in your building. You likely will never be able to get rid of all mold spores. With this in mind, you should do your best to protect your belongings from mold development instead. Follow the advice below to ensure that your items are protected to the fullest.

Dry The Area Completely

First, you need to deal with the excess water and moisture in your business. Start by getting rid of the standing water. Use rags and towels to soak up the water so you can transport it outside. You can also take advantage of a wet-dry vacuum to soak up the water. Either way, make sure the area is completely dry. Remove all water from the area before wiping it down with a dry rag. You can also dry out the area by leaving the doors and windows open.

Get Rid Of Items Impacted By Mold

Now, you need to get rid of items that have been infested with mold. In all likelihood, you’re not going to be able to salvage the items. You can clean metal or plastic, but other materials will have to be thrown away. If it has only been a day or two, you can fix the problem by cleaning the item and disinfecting it. Otherwise, it is best to throw away the moldy items. Remember that mold can grow anywhere in the business, including on the walls and ceiling. You may need to remove moldy drywall and throw away moldy insulation. Depending on the severity of the problem, you may have to hire a professional. Regardless, you must clean up the mess because mold can be downright dangerous.

Deal With Humidity And Moisture Problems

Excess moisture is going to cause more problems in the future. It can contribute to the development of mold. Therefore, you’ll have to deal with excess humidity and moisture issues. If your property has excess humidity, you can use a dehumidifier to resolve the problem. If the property has already developed, don’t use fans. They will only blow the spores throughout the building.

Get In Touch With A Reputable Restoration Company

Finally, you should get in touch with a reputable mold restoration company. Remember that we’re always here to help you. We’ve helped countless residents and business owners deal with these issues. We’re confident that we can do it again. We offer comprehensive mold remediation services so we can get rid of it for you, dispose of it for you, and clean up the mess. Our team has been cleaning up mold for many years. We only employ the leading experts in the industry and provide them with extensive training. Our professionals are prepared to begin helping you resolve this problem. When you decide to use our services, you can guarantee that you and your loved ones will be protected to the fullest. We’ll make sure that the mold is removed safely and that any damaged items are properly disposed of. We’re going to treat you with respect and do our best to make the process convenient for you and your loved ones. Don’t delay fixing this problem because mold can be dangerous. Call our office to get professional assistance right now. We offer services around the clock to resolve your problem at any hour.

from A1 Water & Mold Removal https://topmoldandwaterguysofsanantonio.com/4-steps-for-limiting-mold-development-in-your-business-building-after-a-flood/